TBD

 

UP 900002

Snow Plow

 

Model:  Tender Converted Snow Plow

Operating Weight:  i229,420

Builder:  UP Shops

Length:  41 feet 5 1/16 inches

Built:  (converted) September 1949

Builder #:  02

Status:  Operational

 

 

 

UP_900002

Read an article about Engine Tender Snow Plows by James L. Ehernberger

The winter of 1948-1949 went into the record books as the nastiest and longest snow blockade in the history of the Union Pacific. Snow fighting equipment was challenged to its fullest capacity.

Prior to the storm, the Union Pacific had 19 wedge snow plows available, mostly single track type except for three double track plows. These were wooden bodied and most had wood under frames. The most modem of these wedge plows was built on a flat ear in 1928, while the majority dated back to between 1914 and 1920.

UP decided to convert twelve 12,000 gallon (four wheel truck) steam locomotive tenders into snow plows. The work was done in UP’s own shops.

UP 900002 was the second conversion. It was built in September 1949 at the Pocatello Idaho shop. It was created from tender 12-C-213 which had served with steam locomotive 3562. To keep it on the rails while plowing snow, this car’s former water tank is heavily ballasted with rock and weights 229, 420 pounds.

up_900002_022709_DSC_4738_375x251.jpg

UP_900002

up_900002_022709_DSC_4739_375x251.jpg

UP_900002

up_900002_200818_gelems_DSC_8703_375x251.jpg

UP_900002 - With the RIP tracks rearranged, RIP 1 cars are getting staged to go back in. The silver snow plow had its headlight turned on for this picture.
Photo by Greg Elems 8/18/20

 
Links to Train Sheet articles about UP 900002:
Train Sheet #047, Page 10:  Snow Plow!
Train Sheet #046, Page 4:  Arrivals & Departures Nov/Dec 1990